Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PET Blowing Machine price
#1
Product Introduction
5 gallon semi automatic PET Blowing Machine is suitable for max. 5 gallon bottle. It adopts TAIWAN XINJE advanced PLC control, Parker high pressure valve, Airtac solenoid valves, Korea Voltage meter, imported parts ensure the stable running. 2 year warranty period, 24hr prompt after-sale service relieve your worries during production.
Product Parameter
Models MS-20L
Output60-240 BPH
Mold cavities1
Opening Stroke320 mm
Mold Max. Width X Height480 X 600 mm
Bottles
Volume20L
Neck25-120 mm
Max Diameter280 mm
Max. container height510 mm
Power
Heater Qty.36 PCS
Total Power37 KW
VoltageCustomized
Air Resource
Low pressure8-10bar
High pressure30bar
Dimension & Weight
Main machine Size2500*950*2050 (mm)
Oven2300*700*2010 (mm)
Weight2500 KGS
Others
ConditionBrand New
Product Feature
1.Controlled by KBS blow molding machine computer. Operate consistently and simply
2.Pneumatic elements from AIRTAC (German) and SMC (Japan)
3.Mechanical units are compact and rational
4.Malfunction alert and diagnostic units allow easy maintenance
Product Application
FAQ
Q1: Are you a trading company or a manufacturer?
A1: We are a manufacturer, can offer you best service.
Q2: How long is the warranty period?
A2: All of products have two years warranty.
Q3: How about the spare parts?
A3: We offer plenty of spare parts delivered along with machine, which would ensure at least 3-years use. Besides, your sale and after-sale service is prompt within 24 hrs. Any requirement on the parts or machine questions, we鈥檒l reply at first timing, sending by international courier.
Q4: How about the package?
A4: If machines are delivered in full container, machines would be packed with protective foam and film; if delivered by LCL, machines would be packed with fumigation free wooden case.
Industry Tips (Trouble shooting during PET Blow Molding and Solution)
Damaged for Deformed Neck Finish
Description
Preform neck has been damaged inside the blow machine.
Cause
1.Preform not sitting correct on the mandrel/preform holder;
2.Mold neck dimension too small;
3.Mandrel to mold alignment issue;
Solution
1.On machines with loading grippers, check gripper alignment to mandrels;
2.Mold opening for neck should be slightly larger than neck and edges should be slightly tapered;
3.Reduce lamp setting in zone 1;
4.Make sure mold is located properly on clamp area and that mandrels are shuttled in to the right location.
Reference
Ottmar Brandau (2014), The Rapid Guide to Perfect PET Bottles, Troubleshooting and Process Guide.PET Blowing Machine price
website:http://www.bottleblow.com/pet-blowing-machine/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)